HP J4906A Procurve 3400CL-48G 44 X Gigabit + 4 Dual Personality Ports

Description

HP J4906A Procurve Switch 3400CL-48G 44 X 10/100/1000 & 4 Dual Personality

ProCurve Switch 3400cl-48G is exceptionally affordable 48-port 10/100/1000 intelligent EDGE stackable with optional 10 Gigabit uplinks and stacking capability. Created in response to the growing need for network capacity in a world where high-demand applications are becoming common, this standards-based Layer 3 switch provide outstanding performance as well as exceptional traffic management and access control capabilities. The result is an efficient, secure, high-throughput multi-service network that is able to handle the demands of today’s applications as well as those that will emerge in the future.

Model

Brand: HP

Model: J4906A

Spec

Format: Rackmount

Standards: IEEE 802.1w Rapid Convergence Spanning Tree
IEEE 802.3ad Link Aggregation Control Protocol
IEEE 802.1X Network Login
IEEE 802.1Q VLAN tagging
IEEE 802.1Q GVRP
IEEE 802.3x Flow Control
IEEE 802.1D Spanning Tree
IEEE 802.1s Multiple Spanning Trees
IEEE 802.1AB Link Layer Discovery Protocol
IEEE 802.1Q VLANs
IEEE 802.1v VLAN Classification by Protocol and Port
IEEE 802.1p Priority

Network Management Type: Managed

Jumbo Frames: Yes

Primary Ports: 1 open module slots
44 RJ-45 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-T, IEEE 802.3ab Type 1000Base-T)
Supports a maximum of 2 10-GbE ports or 48 Gigabit ports.
1 RS-232C DB-9 console port
4 Dual Personality Ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; 802.3u Type 100Base-TX; 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers)

Primary Port Speed: 10/100/1000Mbps

Buffer Memory: Packet buffer size: 4 MB (1 MB per 12 ports)
Flash capacity: 16 MB
SDRAM: 128 MB
Dual Flash

Protocols: RFC 783 TFTP
RFC 1542 BootP
RFC 768 UDP
RFC 793 TCP
RFC 2030 Simple Network Time Protocol
DHCP Relay
RFC 2453 RIPv2
IGMPv3
RFC 2474 DiffServ Precedence
RFC 2598 DiffServ Assured Forwarding (AF)
RFC 2138 RADIUS
SSHv1/SSHv2 Secure Shell
SNMPv1/v2c/v3
RFC 1493 Bridge MIB
RFC 2096 IP Forwarding Table MIB
RFC 2863 Evolution of Interface
RFC 1058 RIP
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events)
XRMON
RFC 2021 RMON probe configuration (RMON v2)
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB
RFC 2618 RADIUS Client MIB
RFC 951 BootP
RFC 854 Telnet
RFC 792 ICMP
RFC 826 ARP
RFC 3376 IGMPv1/v2/v3
RFC 2328 OSPFv2 (includes route authentication)
RFC 2597 DiffServ Expedited Forwarding (EF)
RFC 1492 TACACS+
RFC 2866 RADIUS accounting
Secure Sockets Layer (SSL)
HTML and telnet management
RFC 1213 MIB II
RFC 2737 Entity MIB
RFC 2665 Ethernet MIB
RFC 1724 RIPv2 MIB
RFC 3164 Syslog
sFlow
RFC 2668 802.3 MAU MIB
RFC 1850 OSPF MIB
RFC 2620 RADIUS Accounting MIB

Security: Access control lists (ACLs): provide IP Layer 3 filtering based on source/destination IP address/subnet and source/destination TCP/UDP port number
Port security: prevents unauthorized access using MAC address lockdown
Source-port filtering: allows only specified ports to communicate with each other
TACACS+: eases switch management security administration by using a password authentication server
Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
802.1X and RADIUS network login: control port-based access for authentication and accountability
MAC address lockout: prevents configured particular MAC addresses from connecting to the network
Web-based authentication: similar to 802.1X, provides a browser-based environment to authenticate clients that do not support the 802.1X supplicant
Secure FTP: allows secure file transfer to/from the switch; protects against unwanted file downloads or unauthorized copying of switch configuration file
Secure management access: all access methods—CLI, GUI, or MIB—are securely encrypted through SSHv2, SSL, and/or SNMPv3
CSA 22.2 No. 60950; EN 60950/IEC 60950; UL 60950

PoE: No

Stackable: Yes

SNMP: Yes

QoS: Yes

LACP: Yes

Layer: 4

Port Mirroring: No

Module Support: Yes

VLAN Support: Yes

Power: Voltage: 100-127 VAC/200-240 VAC
Current: 3.0 A /1.5 A
Power: 141 W
Frequency: 50/60 Hz

Dimensions: 17.3″ x 16.9″ x 1.7″

Weight: 10.84 lbs.

Temperature: 0ºC to 40ºC (32ºF to 104ºF)

Humidity: 15 % to 95 % at 104 °F (40 °C), noncondensing

Features

Features: Selectable queuing configurations: increase performance by selecting the queuing configuration that best meets the requirements of network applications
Jumbo frames: on Gigabit and 10-Gigabit ports, allow high-performance remote backup and disaster-recovery services
Dual-personality functionality
ProCurve/IEEE Auto-MDIX
Router redundancy (XRRP)
802.3ad Link Aggregation Control Protocol (LACP) and ProCurve trunking
802.1s Multiple Spanning Tree
802.1w Rapid Convergence Spanning Tree Protocol
Optional redundant power supply
ProCurve switch meshing
VLAN support and tagging
Group VLAN Registration Protocol (GVRP)
802.1v protocol VLANs
Layer 3 IP routing
Rate limiting
Layer 4 prioritization
Traffic prioritization (802.1p)
Class of Service (CoS)
IP multicast snooping and data-driven IGMP
sFlow (RFC 3176)
RMON, XRMON, and SMON: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
Find-Fix-and-Inform
iSCSI support
Dual flash images
Friendly port names: allow assignment of descriptive names to ports
Link Layer Discovery Protocol (802.1ab)
Stacking capability